help with president george

i have a president george that looks as new there are two wires off the echo/mic unit will rx/tx but very low sound is there anybody out there that can fix it for me i am in macclesfield cheshire please help

Hello & welcome to the site ste00.
If I understand your question correctly you have two loose wires on the microphone cable.
Normally this would be the end that connects to the radio, so I will see if I can find a wiring diagram for that end.
The job sounds a simple one & one that anyone semi competent with a soldering iron should be up to doing. If you do not know anyone then visit some where local to you that fixes domestic appliances or preferably a radio dealer, be that amateur CB, scanner what ever.

This lot maybe able to direct you towards someone who can solder.
http://www.airbandonline.co.uk/
PO Box 376, Macclesfield, Cheshire, SK11 8WX, England
Business hours daily: 09.00 ~ 18.00.
Voicemail Service: Out of business hours.
Email: Airbandol@aol.com Tel: + 44 (0)7876 561 041

Thunderpole do a CB mike wiring page & if the link has worked for me here is the President George link.
http://www.thunderpole.co.uk/mic_wiring_p6.htm

Macclesfield & District Radio Society
http://www.gx4mws.com/

the wires are on a block inside the radio there are seven wires coming from it i need a pic of the inside of another george to trace were to solder it back anybody got a george and dont mind taking the lid off that would be a big help steve macclesfield

Try
http://www.cbtricks.com/radios/president/george/graphics/president_george_sm.pdf
try page 25.