help needed
4 posters
help needed
i have a 144 swr meter that has a slight fault,when setting the forward ,the needle bounches all over the range .any ideas?.could it be a component on its way out?
2E0ZMO- Moderator
- Call Sign : 2e0zmo
Other Call Signs : m3zmo
Locator : io83nn
DXCC Entity : england
HF Rig : icom ic706mk1
HF Antenna : g5rv
VHF / UHF Rig : icom ic2800,yaesu ft7800
VHF / UHF Antenna : tri band colinear,duel band on the van
HandHeld : puxing px777
Preferred Bands : 2m,70cm ,20m
Location : NORTHWEST ENGLAND
Registration date : 2007-10-10
Number of posts : 547
Points : 332
Reputation : 16
Re: help needed
This does happen sometimes, but being a technical inept I'm not sure why Normally just putting a small drop of switch cleaner in the pot solves the problem immediately.
Re: help needed
Check the SO-239 sockets make sure the PL259 plugs are making good connections.Check all lead connections.
Is your patch lead ok ?
Daft question is the meter ok for the frequency you are trying to check VSWR.Have you shoved a lot of RF through it.
Is it rated for the power .
Good luck Andy G6OHM
Is your patch lead ok ?
Daft question is the meter ok for the frequency you are trying to check VSWR.Have you shoved a lot of RF through it.
Is it rated for the power .
Good luck Andy G6OHM
g6ohm- Member
- Call Sign : G6OHM
Other Call Signs : M3FTV NOW TAKEN OVER BY MY WIFE ANGELA
Locator : JO02AL,TL38
HF Rig : 2 YAESU FT897D
HF Antenna : GMO0NX INVERTED L 160M - 10M , ANTRON A99
VHF / UHF Rig : 2 YAESU FT897D,KEY KME80, , VARIOUS EXPMR RIGS. FOR MOBILE YAESU FT7800
VHF / UHF Antenna : 2M 4 ELE X BEAM,70CM DOUBLE QUAD ,FLOWERPOT 2M/70CM VERTICAL. 2 ELEMENT 6M TAPE MEASURE ANTENNA IN ROOF SPACE. DIPOLE VERTICAL & HORIZONTAL FOR 4M
HandHeld : YAESU FT60. TAIT T3010 2M,70CM, BAEOFENG UV5R
Preferred Bands : 160M - 10M INCLUDING 5MHZ.
6M,4M,2M,70CM
Location : CHATTERIS IN CAMBRIDGESHIRE
Registration date : 2008-01-23
Number of posts : 56
Points : 21
Reputation : 0
Re: help needed
i have fixed it,a sqirt of switch cleaner in the pot cured it
2E0ZMO- Moderator
- Call Sign : 2e0zmo
Other Call Signs : m3zmo
Locator : io83nn
DXCC Entity : england
HF Rig : icom ic706mk1
HF Antenna : g5rv
VHF / UHF Rig : icom ic2800,yaesu ft7800
VHF / UHF Antenna : tri band colinear,duel band on the van
HandHeld : puxing px777
Preferred Bands : 2m,70cm ,20m
Location : NORTHWEST ENGLAND
Registration date : 2007-10-10
Number of posts : 547
Points : 332
Reputation : 16
Re: help needed
Glad to see you have fixed it Andy.
Pat on the back old boy...
Pat on the back old boy...
2W0PWR- Admin
- Call Sign : 2W0PWR
Other Call Signs : MW3VSG, M3VSG
Locator : IO83KD
DXCC Entity : Wales
VHF / UHF Rig : Yaesu FT-7900 Motorola DM4600 DMR
HandHeld : Wouxun / Motorola DP-3400
Preferred Bands : 80 / 20 / VHF / UHF / D-Star / DMR
Special Event Calls : GB2RFS
Location : North Wales
Registration date : 2007-10-03
Number of posts : 1225
Points : 741
Reputation : 57
Similar topics
» info needed
» Macom EM 27 Battery Fix Needed
» circuit diagram needed
» grandstand homebase cb,same radio as wagner bits needed
» circuit diagram needed for cybernet delta 1 934mhz radio
» Macom EM 27 Battery Fix Needed
» circuit diagram needed
» grandstand homebase cb,same radio as wagner bits needed
» circuit diagram needed for cybernet delta 1 934mhz radio
Permissions in this forum:
You cannot reply to topics in this forum
|
|