Wouxun KG-UVD1P

Its here, dual display and dual banded

CTSS
136-174mhz
400-480mhz
5w VHF
4w UHF
DCS
FM RADIO
FLASHLIGHT
6.25MHZ STEP FOR PMR, HMM INDEED OSSIFER Come on Mick, no channel 10 in use cough cough
WORKS ON THE UK UHF CB CHANNELS LIKE A DREAM (So i am informed)
VOX
SOS FUNCTION
CHINESE OR ENGLISH VOICE

Mine arrived here late today, small video made and more on it over the weekend

And its rOHs approved, from an ISO certified manufacturer.... Are we worthy, are we worthy as customers

soft for change range and other on follow web page There unlock soft.rar, U must have a data cable...



http://www.ulozto.cz/2772014/kg-uvd1p.rar

Lybross wrote:
VHF: 130 MHz the lowest and be stable.
VHF: 199.995 MHz the highest and be stable.
UHF: 400 MHz the lowest and be stable.
UHF: 518.995 MHz the highest and be stable

What about unwanted signals?
What filtration does a Wouxon have?
I would be surprised if there is nothing to stop unwanted out of band signals.
Lets face it a simple turned curcit can do that, it's cheap & very very simple, but screw that & what are you left with?

I am a total novice to CB radios. Purchased a Wauxun KG-UVD1P to have more watt power without having an in-dash unit for my motorhome. Silly me, I thought I was purchasing a CB Radio but I understand this can be programmed. I have a USB Cable for the unit and have installed the drivers and download the Wouxun prog sware from W's site. Problem is the software recognising the W. Using the KG-UVD1P software, I click on "read from radio" and after 15 seconds or so, I get the message FAILED CONNECTION. I have check the port assignment both in the SW and Device Manager. All okay. INstruction manuals are very limited and of little if not zero help. Anyone out there with some input? by the way, I have uninstalled and reinstalled drivers again

paulfelt wrote:I am a total novice to CB radios. Purchased a Wauxun KG-UVD1P to have more watt power without having an in-dash unit for my motorhome. Silly me, I thought I was purchasing a CB Radio but I understand this can be programmed. I have a USB Cable for the unit and have installed the drivers and download the Wouxun prog sware from W's site. Problem is the software recognising the W. Using the KG-UVD1P software, I click on "read from radio" and after 15 seconds or so, I get the message FAILED CONNECTION. I have check the port assignment both in the SW and Device Manager. All okay. INstruction manuals are very limited and of little if not zero help. Anyone out there with some input? by the way, I have uninstalled and reinstalled drivers again

Depends which version of the radio you have. Check the box and see what the software version is. Are you running windows xp, vista or windows 7 as thats a difference also. Do you have the latest version of the drivers and the software?

Normally install the software and drivers, restart PC and then connect the radio to the data cable and then the radio to pc. Switch on the radio and start the software,, i had the same issues and they were solved with the software. See if these will help at all and if not let us know.

Could not upload anything so here are the links to the newest bits:

http://www.wouxun.com/DownView.asp?ID=99&SortID=4 for XP

http://www.wouxun.com/DownView.asp?ID=141&SortID=12 Vista and Windows 7

Regards

Simon